EPOXIDATION OF CASTOR OIL (Ricinus communis) FROM THE PROVINCE OF MANABÍ-ECUADOR

Main Article Content

Genesis Baque P.
https://orcid.org/0000-0002-1663-6930
Anthony Intriago F.
Segundo García M.
Gabriel Burgos B.
Gonzalo García V.

Abstract

Castor oil (Ricinnus communis) attracts interest in the chemical industry because it can be used as a raw material to produce chemical products or energy sources through chemical modifications such as  epoxidation. The present study is of an investigative and experimental nature that focuses on the  epoxidation of castor oil of the Portoviejo-67 variety from the province of Manabí-Ecuador through the Prileschajew reaction to evaluate the physicochemical characteristics of crude and epoxidized oil through the ASTM D-5558, EN 14111, NTC 2366 standards for saponification number, iodine number and acid number by titration techniques, INEN 39 standard for moisture content by heating loss, ASTM D-1217 standard for density by pycnometry and kinematic viscosity by means of a capillary viscometer using the ASTM D-445 standard, comparing the results with the specifications ASTM and DIN ISO 51605: 2010-09. According to the
results, the crude and epoxidized oil meets the ASTM and DIN ISO 51605: 2010-09 specifications, except for moisture and acidity with values are greater than 0.075 % and 2 mg KOH/g oil, respectively, representing a  decrease in the quality of the oils. Regarding the epoxidation, a conversion of 81.34 % of the unsaturations was obtained and according to the viscosity the epoxidized oil could be classified with an ISO VG 320 grade  ideal for industrial gear lubrication. It is concluded that a high conversion of the double bonds to epoxy groups was achieved, being the ideal process to obtain high yields.

Downloads

Download data is not yet available.

Article Details

Section
Cientific papers

References

Arriola, G., y Monjaras, M. (2003). Comprobación de pureza de los aceites comestibles diferentes marcas comerciales en el área metropolitana (Tesis de grado). Universidad Del Salvador, El salvador.

Atamari, G., y Anco, M. (2015). Obtención del poliéster de ricino a partir del aceite de ricino y ácido ricinoleico, determinando su rendimiento óptimo para su aplicación en el champu de aloe vera (Tesis de grado). Universidad Nacional de San Agustín de Arequipa, Arequipa, Perú.

Borugadda, V., y Goud, V. (2014). Epoxidation of castor oil fatty acid methyl esters (COFAME) as a lubricant base stock using heterogeneous ion-exchange resin (IR-120) as a catalyst. Science Direct, (54), 75-84. https://www.sciencedirect.com/science/article/pii/S1876610214011266

Borugadda, V., y Goud, V. (2015). In-Situ epoxidation of castor oil using heterogeneous acidic ion-exchange Resin Catalyst (IR-120) for Bio-Lubricant Application. Tribology Online, 5(10), 354-359. https://www.jstage.jst.go.jp/article/trol/10/5/10_354/_pdf/-char/ja

Cornejo, M., y Estrada, O. (2012). Caracterización de aceite de higuerilla (Ricinus communis) de dos variedades silvestres para la producción de biodiesel en la región del Valle de Mezquital, Hidalgo (Tesis de maestría). Centro de investigación en materiales avanzados, S. C., Chihuahua.

Cruz, K., Montañez, J.C., Aguilar, C.N., Sáenz, G., Gámez, I.A., y Flores, E. (2015). Obtención de aceite epoxidado de semilla de algodón utilizando un ácido débil. Avances en Ciencias e Ingeniería, 4(6), 11-18. https://www.redalyc.org/pdf/3236/323643356002.pdf

Da Costa, D., Serra, T., Plentz, S., y Meneghtetti, M. (2010). Biodiesel production by ethanolysis of mixed castor and soybean oils. Fuel, 12(89), 3791-3794. https://reader.elsevier.com/reader/sd/pii/S0016236110003637?token=6DF067C7F307A64E2CE0D88C47D951C62D7B224803AD5EA8EDD038E0CF20CCD44E2FA40FDEAE12EB78686CE921668198&originRegion=us-east-1&originCreation=20220525041512

Díaz, A., y Vaca, J. (2017). Diseño y construcción de un reactor piloto para la producción de biodiesel a base de aceite de higuerilla. (Tesis de graso) Universidad técnica del Norte, Ibarra, Ecuador.

Díaz, P. (2019). Optimización de la extracción acuosa enzimática de aceite de semillas de Ricinus communis (Tesis de grado). Tecnológico nacional de México, Tuxtla, Chiapas.

Hernández, E. (2017). Diseño de un multiplicador de velocidad de relación de transmisión 6 para el acople a una fresadora cnc (Tesis de grado). Universidad Politécnica de Valencia, Valencia, España.

Hernández, M. (2020). Desarrollo Biotecnológico de biolubricantes a partir de grasa de pollo (Tesis doctoral). Instituto Tecnológico de Tuxtla Gutiérrez, Tuxtla Gutiérrez, Chiapas.

Lämsä, L., y Kosonen, K. (2016). Proceso de epoxidación de aceites vegetales (España.Patent No:2 580 962).

Lombeida, N. (2015). Diseño de un reactor tipo batch para la obtención de biodiesel a partir de aceite de ricino (Ricinus communis) (Tesis de grado). Escuela Politécnica Nacional, Quito.

Martínez, D.C. (2021). Reacciones de epoxidación de aceite de soja catalizadas por un sólido de dioxomolibdeno (VI) tipo MOF. (Tesis de grado-maestría) Universidad Nacional de Colombia, Bogotá, Colombia.

Milchert, E., Malarczyk, K., y Musik, M. (2016). Technological aspects of vegetable oils epoxidation in the presence of ion exchange resins: a review. Polish Journal of Chemical Technolohy, 3(18), 128-133. https://yadda.icm.edu.pl/baztech/element/bwmeta1.element.baztech-d25eaa1c-d063-4363-a7ed-432bae02e9ec

Montoya, J. (2009). Modelamiento y simulación de la cinética de transesterificación del aceite de ricino con alcohol etílico, catalizada con NaOH (Tesis de maestría). Universidad nacional de Colombia sede de Medellín, Medellín, Colombia.

Morales, W., Dagnino, E., Sequeira, A., Díaz, A., y Chamorro, E. (2008). Tratamiento de aceite crudo de algodón para transesterificación alcalina. Avances en Energías Renovables y Medio Ambiente, 1(12), 95-98. http://sedici.unlp.edu.ar/handle/10915/94611

Nieto, J. (2019). Estudio de la reacción de carbonatación del aceite de linaza epoxidado (Tesis de maestría). Universidad autónoma del Estado de México, Toluca, Estado de México.

Obanla, O., Mohammed, F., Alebiosu, O., Ojewumi, M., Oladimeji, T., y Babatunde,D. (2021). Study on the lubricating properties of castor (Ricinus communis) and hydroxylated Rubber (Hevea brasiliensis) seed oil. ACS Omega, 43(6), 28471-28476. https://pubs.acs.org/doi/full/10.1021/acsomega.0c05810

Omari, A., Mgani, Q., y Mubofu, E. (2015). Fatty acid profile and Physico-chemical parameters of castor oils in Tanzania. Green and Sustainable Chemistry, 4(5), 10. https://www.scirp.org/html/3-5500205_61169.htm

Omohu, O., y Omale, A. (2017). Physicochemical Properties and Fatty Acid Composition of Castor Bean Ricinus communis L. Seed Oil. European Journal of Biophysics,4(5), 62-65. https://www.sciencepublishinggroup.com/journal/paperinfo?journalid=117&doi=10.11648/j.ejb.20170504.11

Origlia, E., Casuscelli, S., y Cánepa, A.L. (2019). Synthesis of materials as catalysts in the epoxidation of FAME’s obtained from castor oil. Conicet, 71-75.

Panhwar, T., Ahmed, S., Waheed, A., Ahmed, A., Naz, F., Hussain, Z., Sattar, A., y Hussain, S. (2016). Characteristics and composition of a High oil Yielding Castor Variety from Pakistan. Jos of Oleo Science, 65(6), 471-476. https://www.jstage.jst.go.jp/article/jos/65/6/65_ess15208/_pdf/-char/ja

Paucar, M. (2020). Evaluación del rendimiento de aceite de higuerilla (Ricinus communis L.) en zonas óptimas y no óptimas de Imbabura para obtener biodiesel B5 (Tesis de grado). Universidad técnica del norte, Ibarra, Ecuador.

Paul, A., Borugadda, V., Reshad, A., Bhalerao, M., Tiwari, P., y Goud, V. (2021). Comparative study of physicochemical and rheological property of waste cooking oil, castor oil, rubber seed oil, their methyl ester and blends with mineral diesel fuel. Materials Science for Energy Technologies, (4), 148-155. https://www.sciencedirect.com/science/article/pii/S2589299121000136

Ramírez, A. (2014). Estudio experimental de las propiedades fisicoquímicas y tribológicas de un biolubricante formulado a partir de aceite de higuerilla (Tesis de grado). Universidad Veracruz, Xalapa Enríquez.Ramírez, L. (2020). Modelo cinético para la reacción de epoxidación de aceite vegetal usado (Tesis de maestría). Universidad Nacional de Colombia, Bogotá.

Ríos, Í., Cordeiro, J., Arruda, T., Rodrigues, F., Uchoa, A., Luna, F., Jr, L., y Ricardo, N. (2019). Chemical modification of castor oil fatty acids (Ricinus communis) for biolubricant applications: An alternative for Brazils green market. Industrial Crops and Products, (145). https://www.sciencedirect.com/science/article/abs/pii/S0926669019310106

Rivera, Y., Gutiérrez, C., Gómez, R., Matute, M., y Izaguirre, C. (2014). Cuantificación del deterioro de aceites vegetales usados en procesos de frituras en establecimientos ubicados en el Municipio Libertador del Estado Mérida Ciencia e Ingeniería. Revista Ciencia e Ingeniería, 3(35), 157-164. https://www.redalyc.org/pdf/5075/507550626005.pdf

Sánchez, I., y Huertas, K. (2012). Obtención y caracterización de biodiesel a partir de aceite de semillas de Ricinus communis. (HIGUERILLA) modificadas genética-mente y cultivadas en el eje cafetero (Tesis de grado). Universidad tecnológica de Pereira, Pereira.

Sinadinovic, S., Jankovic, M., y Borota, O. (2012). Epoxidation of castor oil with peracetic acid formed in situ in the presence of an ion Exchange resin. Chemical Engineering and Processing, (62), 106-113. https://www.sciencedirect.com/science/article/abs/pii/S025527011200164X

Sudha, G., Kalita, H., Mohanty, S., y Nayak, S. (2017). Biobased epoxy blends from epoxidized castor oil: effect on mechanical, thermal, and morphological properties. Macromol Research, 25(5), 420-430. https://link.springer.com/article/10.1007/s13233-017-5063-3

Villafuerte, J. (2019). Selección de lubricantes según la función de componentes mecánicos (Tesis de bachiller). Universidad Continental, Arequipa, Perú.

Yeboah, A., Ying, S., Lu, J., Xie, Y., Amoanimaa-Dede, H., Boateng, K., Chen, M., y Yin, X. (2020). Castor oil (Ricinus communis): a review on the chemical composition and physicochemical properties. Food Science and Technology, 41(2), 399-413.

https://www.scielo.br/j/cta/a/jtzR5bpyvr9Fm6WYDrRqt7t/?lang=en&format=html

Yeadon, D., McSherry, W., y Goldblatt, L. (1959). Preparations and properties of castor oil Urethane Foams. Journal of the American Oil Chemists’, 1(36), 16-20. https://aocs.onlinelibrary.wiley.com/doi/abs/10.1007/BF02540259

Yusuf, A., Mamza, P., Ahmed, A., y Agunwa, U. (2015). Extraction and characterization of castor seed oil from wild Ricinus communis linn. International Journal of Science, Eviroment and Technology, 5(4), 1392-1404. https://www.researchgate.net/profile/A-Yusuf/publication/282641536_EXTRACTION_AND_CHARACTERIZTION_OF_CASTOR_SEED_OIL_FROM_WILD_RICINUS_COMMUNIS_LINN/links/5614c96408ae4ce3cc63fdea/EXTRACTION-AND-CHARACTERIZATION-OFCASTOR-SEED-OIL-FROM-WILD-RICINUS-COMMU

Zaku, S. G., Emmanual, S. A., Isa, A. H., & Kabir, A. (2012). Comparative studies on the functional properties of neem, jatropha, castor, and moringa seeds oil as potential feed stocks for biodiesel production in Nigeria. Global Journal of Science Frontier Research Chemistry, 12(7), 23-26.

Most read articles by the same author(s)